• Made To Measure
Fire Rated Riser Door (From Both Sides) - Acoustic Rated Riser Door - Smoke Tested Riser Door
Made to measure riser door configurator - Image 2
Made to measure riser door configurator - Image 3
Made to measure riser door configurator - Image 4
Made to measure riser door configurator - Image 5
Made to measure riser door beaded frame
Made to measure riser door configurator - Image 7

Made to measure riser door configurator

Despatched within 5-7 working days

2hr Fire Rated (From Both Sides)

We deduct 7mm from your measurements to allow for tolerance

A made to measure single or double metal riser door for rated wall openings, with 2hr fire rated construction, smoke tested performance, Picture Frame or Beaded Frame options, and a 3 point locking system.

  • *Fire Rating

    *Smoke Test

    *Door Type

    *Door Configuration

    *Door Configuration

    *Acoustic Rating

    *Frame Type

    *Frame Type

    *Frame Type

    *Height (Structural Opening)

    307/2407mm min/max

    *Width (Structural Opening)

    307/907mm min/max

    *Height (Structural Opening)

    307/2407mm min/max

    *Width (Structural Opening)

    307/907mm min/max

    *Height (Structural Opening)

    307/2407mm min/max

    *Width (Structural Opening)

    607/1807mm min/max

Qty
Add £250.00 to the cart to qualify for 5% OFF
    (estimate)
    Enter your postcode for a delivery estimate:
    for postcode ??? ???
    Change Postcode

    Additional Shipping Charges

    See product downloads

    Summary

    A made to measure single or double metal riser door for rated wall openings, with 2hr fire rated construction, smoke tested performance, Picture Frame or Beaded Frame options, and a 3 point locking system.

    Description

    Made to measure riser door configurator

    Product Reference: RD.MTM/FIRE – Despatched within 5-7 working days

    Please note: We deduct 7mm from your measurements to allow for tolerance.

    This made to measure riser door configurator is built for projects where a standard stock size will not suit the wall opening. It can be configured as a single or double metal riser door unit for service risers, cupboards and wall access points where a fire rated and smoke tested access solution is required.

    In the configurator you choose Single Door or Double Door, Picture Frame or Beaded Frame, and on Single Door units whether you need the 30dB acoustic option. You then enter the structural opening size. Both frame types suit different wall finishes while the door specification stays the same.

    This is a useful option for contractors, facilities teams and builders who need a made to measure metal riser door for wall access with a clear Single Door or Double Door specification.

    Riser Doors Specifications

    Frame options

    • Picture Frame: 25mm wide frame face for a clean surface-mounted finish.
    • Beaded Frame: 50mm frame face designed to be finished into the wall surface.

    Construction and finish

    • 1.2mm thick Zintec steel door leaf or leaves.
    • 1.5mm thick Zintec steel frame.
    • 78mm frame depth.
    • Fast fit spring pin pivot hinge manufactured from electroplated steel.
    • Norseal FS1000 intumescent foam tape seal to the door closing edges.
    • Polyester powder coated RAL 9010 pure white, 30% gloss.
    • Corrosion category C1 for very low risk internal environments. Not suitable for outdoor use.

    Locking

    3 point locking system with bright zinc plated mild steel hardware.

    Fire and smoke performance

    • 2hr fire rated wall application, tested to BS EN 1634-1:2014+A1:2018.
    • Fire classification: integrity (E).
    • Tested for wall use from both sides, with the door opening in either direction relative to the fire risk side.
    • Ambient smoke control tested to BS EN 1634-3:2004.
    • Wall application only. Not suitable for ceilings.
    • Single Door and Double Door configurations are supported by the relevant datasheets, certification and test reports in the Downloads tab.

    Suitable wall types listed on the datasheets include plasterboard clad timber or steel stud partitions (exposed studs are not covered) and masonry or concrete walls at least 140mm thick with an overall density of at least 850 kg/m3. Other rated wall constructions may be acceptable subject to advice from a qualified fire consultant.

    For fire rated work, always check the test reports, wall construction details and project requirements before ordering.

    Acoustic rating

    • Single Door configurations can be specified as Non Acoustic Rated or 30dB Acoustic Rated.
    • The 30dB acoustic option is available with either a Picture Frame or Beaded Frame.
    • The Beaded Frame acoustic specification is tested to BS EN ISO 10140-2:2010. See the Downloads tab for the full datasheet.

    Airtightness is not rated. Non acoustic configurations carry no acoustic rating.

    Measuring Guide

    Sizing

    • Single Door range: height 300mm to 2400mm, width 300mm to 900mm.
    • Double Door range: height 300mm to 2400mm, width 600mm to 1800mm.

    How to measure

    1. Measure the structural opening in the wall: height first, then width, in millimetres.
    2. Structural opening sizes should be entered into the configurator.
    3. The 7mm tolerance deduction noted in the Description tab is made for you, so the panel size is the structural opening less 7mm in each direction.

    For clear opening details, refer to the relevant Single Door or Double Door datasheet in the Downloads tab.

    Made to measure riser door configurator
    From: £167.13 (ex. VAT) £0.00 inc. VAT
    In stock
    Qty