WD.PF/FR90.I60.48dB is designed to fit into a structural membrane of a joint-less plasterboard wall system. It is manufactured with a 25mm wide picture frame. The panel has a metal faced door. The panels door leaf is locked in place via a 3 point locking system as standard (other locking options are available upon request). The panel is powder coated RAL 9010 30% gloss as standard (other RAL colours are available upon request).

Riser Door with Fire Rated Insulation Tests;  

• This particular specification is 90 minutes fire rated for integrity and 60 minutes for insulation (EI9060) from both sides up to 2400 x 900mm in a wall application tested in accordance with BS EN 1634-1:2014 + A1:2018 and BS EN 1363-1:2012.
• This particular specification is acoustic rated to 48dB, tested in accordance with BS EN ISO 10140-2:2010.
• This particular specification is not air pressure tested.
• This particular specification is not smoke tested. 

Manufacture Information

The WD.PF/FR90/I60.48DB is manufactured from zintec steel with a 1.2mm thick door and a 1.5mm frame. The panels door leaf is hinged on a full length piano hinge.

Seals for Riser Door with Fire Rated Insulation; 

• Draught seals: NO
• Smoke seals: NO
• Air seals: NO
• Acoustic seals: YES
• Intumescent seals: YES

Fitting Instructions for APD.WD.PF/FR90.I60.48dB 

Make sure the structural opening is at least 10mm larger than the panel size, back of frame size. EG. a 600 x 600mm panel size requires a 610 x 610mm hole size. Remove the door from the frame and place the frame into the set hole. Fix through the approximate fixing holes ensuring the frame is pushed up against the structural opening surround. Check the frame is square by measuring corner to corner. Refit door and lock in intumescent acrylic mastic on both faces of the frame, nominally 5mm wide sealing to the supporting construction.